$10.00
This is all the parts you need to make up to 5 of the flat cable jumpers to be used to connect expansion boards to the V2 Smoothieboard or anything that uses the same IDC cables and connectors such as the Gadgeteer system.
Included:
10pcs- 10 pin connector housing
3pcs- 100mm flat cable
1pc- 200mm flat cable
1pc- 300mm flat cable
| Weight | .1 kg |
|---|
Key features: Single common +V wire which powers hotend, fans and other outputs 5v line with optional output Probe input with servo header Motor connector with multiple connector options XT30 Connector for Hotend allows easy swap. Locking JST connectors for … Continued
This board is a copy of the high side FET circuit that is on the Smoothieboard V2 Prime…with an added fuse and connectors to allow easy connection directly into the extruder harness near the control/power end. Control via setpoint/failsafe controllers … Continued
High quality steel hobbed gear. 8mm shaft diameter. Gun blued. Sharp, precise teeth
