$20.00
9 in stock
This is an adapter board which debounces up to 8 inputs to allow for connection of switches and inputs. It will also act as an interrupt multiplier as the _CH output will toggle and latch upon any trigger to inputs 1-8. _EN clears this trigger.
It has a standard 2.54mm header as well as a 10pin 1.27mm header for use with Smoothieboard V2 and Gadgeteer.
https://github.com/Ccecil/BounceStop
This is a page for the pre-order of the V2 prime board which will be the final retail version. If you would like a board immediately please purchase the “kickstarter version” which is currently in stock. Smoothieboard V2 Prime MCU: … Continued
These are our Stencil8 compatible PCB stencil jig and tooling plates. They allow an easy method of fixturing stencils for adding solder paste to PCBs for surface mount electronics. Uses 2.5mm steel pins with a hole spacing of 10mm from … Continued
An adapter which eases installation of the Official Raspberry pi 7″ touchscreen with the pi. Also, adds a pushbutton/header to add an on/off switch as well as RX/TX connectivity.