$110.00
Smoothieboard ver 1.1 3x custom build
10 in stock
These were a custom build for an OEM with some differences from the standard board.
-No ethernet PHY or connector
-No LEDs onboard (MCU or FETs)
-2x length pin headers
-Recom 5v regulator installed
-No power connector installed
-Pin header in center of pushbutton/LED position
Board comes with 3x A5984 drivers onboard and 3 small MOSFETs installed. Pictures show exact mods.
| Weight | .1 kg |
|---|
Smoothieboard V2 Prime final Revision features. So as we finalized some of the features on the V2 prime it is a good time to do a writeup of what to expect. Please be aware I may be slightly off on … Continued
This is a page for the pre-order of the V2 prime board which will be the final retail version. If you would like a board immediately please purchase the “kickstarter version” which is currently in stock. Smoothieboard V2 Prime MCU: … Continued
This is all the parts you need to make up to 5 of the flat cable jumpers to be used to connect expansion boards to the V2 Smoothieboard or anything that uses the same IDC cables and connectors such as … Continued